Class 10 (ICSE) · Chemistry

Acids, Bases, Salts and Analytical Chemistry

18 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

7
easy
9
medium
2
hard

Acids, Bases, Salts and Analytical Chemistry — quick revision notes

An acid gives hydronium ions (H3O+) as the only positive ions in water. A base gives hydroxide ions (OH-), and an alkali is a base that dissolves in water. Indicators and the pH scale tell you whether a solution is acidic, neutral or alkaline. Salts are normal, acid, basic or complex, and you choose how to prepare a salt by checking whether it is soluble and how reactive the metal is. Analytical chemistry identifies cations from the colour of their solutions and from the precipitates they give with NaOH and NH4OH, both drop by drop and in excess.
  • Litmus: red in acid, blue in alkali. Methyl orange: pink/red in acid, yellow in alkali. Phenolphthalein: colourless in acid, pink in alkali.
  • On the pH scale, 7 is neutral, below 7 is acidic and above 7 is alkaline. Universal indicator gives a different colour for each pH value.
  • Covalent acids such as HCl ionise in water (HCl + H2O -> H3O+ + Cl-). Ionic compounds such as NaOH dissociate into ions that already exist.
  • Acid salt: NaHSO4, NaHCO3. Basic salt: Pb(OH)Cl, Mg(OH)Cl. Complex salt: K4[Fe(CN)6], [Cu(NH3)4]SO4.
  • Dilute acids give CO2 with carbonates and hydrogen carbonates, SO2 with sulphites and hydrogen sulphites, and H2S with sulphides (FeS + H2SO4 -> FeSO4 + H2S).
  • Preparation methods: insoluble salts (BaSO4, PbCl2) by precipitation; soluble sodium, potassium and ammonium salts by titration; CuSO4 from CuO + dil. H2SO4; FeCl3 and FeS by direct combination.
  • With NaOH: Fe2+ gives a dirty green precipitate and Fe3+ a reddish-brown one, both insoluble in excess. Cu2+ gives a pale blue precipitate, insoluble in excess. Zn2+ and Pb2+ give white precipitates that dissolve in excess.
  • With NH4OH: Cu2+ gives a pale blue precipitate that dissolves in excess to form a deep (inky) blue solution. Zn2+ gives a white precipitate that dissolves in excess. Pb2+ gives a white precipitate that does NOT dissolve in excess.
  • Al, Zn and Pb and their oxides and hydroxides are amphoteric. With NaOH they form sodium meta-aluminate (NaAlO2), sodium zincate (Na2ZnO2) and sodium plumbite (Na2PbO2). The metals also release H2.

Common mistakes to avoid

  • Every alkali is a base, but not every base is an alkali. Cu(OH)2, Fe(OH)3 and CuO are insoluble bases, not alkalis.
  • Zn(OH)2 dissolving in excess NH4OH is due to complex formation, not to its amphoteric nature. Pb(OH)2 is amphoteric too, yet it does not dissolve in excess NH4OH.
  • Copper sulphate cannot be made from copper and dilute H2SO4, because copper is below hydrogen in the activity series.
  • Phenolphthalein stays colourless in acid. It does not turn red.
Exam tip: Learn the NaOH/NH4OH precipitate table as a grid (ion, colour, effect of excess) and practise the 'identify the cation' case items. Zn2+ and Pb2+ are told apart only by excess NH4OH.

Acids, Bases, Salts and Analytical Chemistry — solved practice questions

12 ICSE 10 Chemistry questions with step-by-step solutions. Attempt each, then reveal the answer.

Take the timed test first

These questions are in the test, so try it before you read the answers below.

Start · 18 questions
  1. Q1easyReport

    What colour does phenolphthalein show in dilute hydrochloric acid?

    • ABlue
    • BPink
    • CColourless
    • DYellow
    Show answer & solution

    Correct answer: (C) Colourless

    Phenolphthalein is colourless in acidic and neutral solutions and turns pink only in alkaline solutions. So it stays colourless in dilute HCl.
  2. Q2easyReport

    Which ion is responsible for the acidic properties of an aqueous solution of an acid?

    • AHydroxide ion (OH-)
    • BHydronium ion (H3O+)
    • CChloride ion (Cl-)
    • DSodium ion (Na+)
    Show answer & solution

    Correct answer: (B) Hydronium ion (H3O+)

    In water, an acid releases H+ ions, which join with water molecules to form hydronium ions (H3O+). These are the only positive ions an acid produces, and they cause its acidic properties.
  3. Q3easyReport

    An alkali is a base that is soluble in water. Which of the following bases is NOT an alkali?

    • ACalcium hydroxide
    • BCopper(II) hydroxide
    • CPotassium hydroxide
    • DSodium hydroxide
    Show answer & solution

    Correct answer: (B) Copper(II) hydroxide

    Copper(II) hydroxide is a base, but it is insoluble in water, so it is not an alkali. NaOH, KOH and Ca(OH)2 dissolve in water (Ca(OH)2 only slightly) and give OH- ions, so they are alkalis.
  4. Q4easyReport

    Which pH value indicates the most strongly alkaline solution?

    • A8
    • B6
    • C13
    • D1
    Show answer & solution

    Correct answer: (C) 13

    A pH above 7 is alkaline, and the higher the pH, the stronger the alkali. pH 13 is far above 7, so it is the most strongly alkaline. pH 1 and 6 are acidic, and pH 8 is only weakly alkaline.
  5. Q5easyReport

    Which of the following aqueous solutions is colourless?

    • AZinc sulphate
    • BCopper(II) sulphate
    • CIron(III) chloride
    • DIron(II) sulphate
    Show answer & solution

    Correct answer: (A) Zinc sulphate

    Zinc sulphate solution is colourless. Copper(II) sulphate solution is blue, iron(II) sulphate solution is light green and iron(III) chloride solution is yellowish brown.
  6. Q6easyReport

    Which of the following oxides is amphoteric?

    • ASulphur dioxide
    • BSodium oxide
    • CZinc oxide
    • DMagnesium oxide
    Show answer & solution

    Correct answer: (C) Zinc oxide

    Zinc oxide reacts with acids and with alkalis, so it is amphoteric. With NaOH it forms sodium zincate: ZnO + 2NaOH -> Na2ZnO2 + H2O. MgO and Na2O are basic oxides, and SO2 is an acidic oxide.
  7. Q7easyReport

    Sodium hydroxide solution is added drop by drop and then in excess to iron(II) sulphate solution. What is observed?

    • AA white precipitate that dissolves in excess
    • BA reddish-brown precipitate that dissolves in excess
    • CA pale blue precipitate that does not dissolve in excess
    • DA dirty green precipitate that does not dissolve in excess
    Show answer & solution

    Correct answer: (D) A dirty green precipitate that does not dissolve in excess

    FeSO4 + 2NaOH -> Fe(OH)2 + Na2SO4. Iron(II) hydroxide is a dirty green precipitate. It is not amphoteric, so it does not dissolve in excess NaOH.
  8. Q8mediumReport

    Which of the following is an acid salt?

    • AK4[Fe(CN)6]
    • BNaHSO4
    • CPb(OH)Cl
    • DNa2SO4
    Show answer & solution

    Correct answer: (B) NaHSO4

    An acid salt forms when an acid's replaceable hydrogen is only partly replaced by a metal. NaHSO4 still has one replaceable H from H2SO4. Na2SO4 is a normal salt, Pb(OH)Cl is a basic salt and K4[Fe(CN)6] is a complex salt.
  9. Q9mediumReport

    Which of the following is a complex salt?

    • APotassium ferrocyanide, K4[Fe(CN)6]
    • BSodium hydrogen carbonate, NaHCO3
    • CSodium carbonate, Na2CO3
    • DBasic magnesium chloride, Mg(OH)Cl
    Show answer & solution

    Correct answer: (A) Potassium ferrocyanide, K4[Fe(CN)6]

    A complex salt contains a complex ion that stays intact in solution. K4[Fe(CN)6] gives 4K+ and the complex ion [Fe(CN)6]4-, not separate Fe2+ and CN- ions. NaHCO3 is an acid salt, Mg(OH)Cl is a basic salt and Na2CO3 is a normal salt.
  10. Q10mediumReport

    Which gas is evolved when dilute sulphuric acid is added to iron(II) sulphide?

    • AHydrogen sulphide
    • BSulphur dioxide
    • CSulphur trioxide
    • DHydrogen
    Show answer & solution

    Correct answer: (A) Hydrogen sulphide

    Dilute acids react with sulphides to give hydrogen sulphide: FeS + H2SO4 -> FeSO4 + H2S. The gas smells of rotten eggs. Sulphur dioxide comes from sulphites and hydrogen sulphites, not from sulphides.
  11. Q11mediumReport

    Ammonium chloride is warmed with sodium hydroxide solution. The gas evolved turns moist red litmus paper blue. The gas is:

    • AAmmonia
    • BChlorine
    • CHydrogen chloride
    • DHydrogen
    Show answer & solution

    Correct answer: (A) Ammonia

    Alkalis release ammonia from ammonium salts: NH4Cl + NaOH -> NaCl + H2O + NH3. Ammonia is the only common basic gas, so it turns moist red litmus blue.
  12. Q12mediumReport

    What are the products when aluminium reacts with hot concentrated sodium hydroxide solution?

    • ASodium meta-aluminate and hydrogen
    • BAluminium oxide and hydrogen
    • CAluminium hydroxide and oxygen
    • DSodium meta-aluminate and oxygen
    Show answer & solution

    Correct answer: (A) Sodium meta-aluminate and hydrogen

    2Al + 2NaOH + 2H2O -> 2NaAlO2 + 3H2. Aluminium is amphoteric, so it dissolves in the alkali and forms sodium meta-aluminate (NaAlO2), releasing hydrogen gas. No oxygen is formed.

Want the full set? Practise all 18 Acids, Bases, Salts and Analytical Chemistry questions →