Class 9 (CBSE) · Science

Sound

30 practice questions with full step-by-step solutions, quick revision notes — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

11
easy
15
medium
4
hard

Sound — quick revision notes

Sound is a form of energy produced by vibrating objects, and it needs a material medium such as a solid, liquid or gas to travel. In air it travels as a longitudinal wave made of compressions and rarefactions. A sound wave is described by its frequency, amplitude, time period, wavelength and speed; these decide its pitch, loudness and quality. Sound reflects like light, which gives us echoes, reverberation and many devices that use multiple reflection, and ultrasound (above 20 kHz) has important uses in medicine and industry.
  • Sound is produced by vibrating objects and needs a medium; it cannot travel through a vacuum.
  • Sound waves in air are longitudinal: particles of the medium oscillate parallel to the direction in which the wave travels.
  • A compression is a region of high pressure and density; a rarefaction is a region of low pressure and density.
  • Frequency (in hertz, Hz) is the number of oscillations per second; time period T = 1/f; wave speed v = f x wavelength.
  • Pitch depends on frequency, loudness depends on amplitude, and quality (timbre) lets us tell apart sounds of the same pitch and loudness.
  • Sound travels fastest in solids, slower in liquids and slowest in gases, and its speed in a medium increases with temperature.
  • For a distinct echo, the reflected sound must arrive at least 0.1 s after the original sound, so the reflecting surface must be at least about 17 m away in air (at about 340 m/s). Echo distance = (speed x time) / 2.
  • Reverberation is sound persisting in a big hall because of repeated reflections; it is reduced with sound-absorbing materials such as fibreboard, rough plaster and curtains. Megaphones, horns, stethoscopes, curved ceilings and soundboards all use multiple reflection.
  • Humans hear 20 Hz to 20 kHz. Below 20 Hz is infrasound (produced by elephants and rhinoceroses); above 20 kHz is ultrasound (used by bats and dolphins). Ultrasound is used to clean hard-to-reach parts, detect cracks in metal, in echocardiography and ultrasonography, and to break kidney stones.

Common mistakes to avoid

  • Mixing up pitch and loudness: pitch depends on frequency, loudness depends on amplitude.
  • Forgetting to halve the total distance in echo problems: sound travels to the reflector and back.
  • Thinking that sound travels faster in air than in water or steel; the order is solids > liquids > gases.
  • The distance between a compression and the next rarefaction is half a wavelength, not one full wavelength.
Exam tip: Write the formula first (v = f x wavelength, f = 1/T, or 2d = v × t for echoes), then put in the values with units. Most numerical marks are lost through a forgotten factor of 2 or a wrong unit conversion.

Sound — solved practice questions

8 Class 9 Science questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    Sound cannot travel through which of the following?

    • AWater
    • BSteel
    • CVacuum
    • DAir
    Show answer & solution

    Correct answer: (C) Vacuum

    Sound needs a material medium to travel. A vacuum has no particles to pass on the vibrations.
  2. Q2easyReport

    Sound is produced by:

    • AVibrating objects
    • BLiving beings only
    • CObjects at rest
    • DElectric devices only
    Show answer & solution

    Correct answer: (A) Vibrating objects

    All sound comes from vibrating objects, whether they are vocal cords, strings or the membranes of drums.
  3. Q3easyReport

    Sound waves travelling through air are:

    • ATransverse waves
    • BElectromagnetic waves
    • CLongitudinal waves
    • DWaves that need no medium
    Show answer & solution

    Correct answer: (C) Longitudinal waves

    In air, particles oscillate along the direction the wave travels, which makes sound a longitudinal wave.
  4. Q4easyReport

    In a sound wave, a region where the particles are crowded together and the pressure is high is called a:

    • ACrest
    • BCompression
    • CTrough
    • DRarefaction
    Show answer & solution

    Correct answer: (B) Compression

    A compression is a region of high density and high pressure. A rarefaction is a region of low density and low pressure.
  5. Q5easyReport

    The audible range of frequencies for a normal human ear is roughly:

    • A20 kHz to 200 kHz
    • B2 Hz to 2 kHz
    • C200 Hz to 200 kHz
    • D20 Hz to 20 kHz
    Show answer & solution

    Correct answer: (D) 20 Hz to 20 kHz

    Human beings can hear sounds with frequencies from about 20 Hz to 20,000 Hz (20 kHz).
  6. Q6easyReport

    The SI unit of frequency is:

    • AHertz
    • BMetre
    • CSecond
    • DDecibel
    Show answer & solution

    Correct answer: (A) Hertz

    Frequency is the number of oscillations per second, measured in hertz (Hz).
  7. Q7mediumReport

    The pitch of a sound depends on its:

    • AFrequency
    • BAmplitude
    • CSpeed in the medium
    • DDistance from the source
    Show answer & solution

    Correct answer: (A) Frequency

    The higher the frequency, the higher the pitch, so pitch is decided by frequency.
  8. Q8easyReport

    The loudness of a sound is determined by its:

    • AFrequency
    • BWavelength
    • CTime period
    • DAmplitude
    Show answer & solution

    Correct answer: (D) Amplitude

    A sound wave with a larger amplitude carries more energy and sounds louder.

Ready to test yourself? Take the 22-question Sound test →