Mathematics
17 chapters · 477 practice questions with full solutions — all free.
Reviewed by Kaustav Basak (19 years teaching)Written with AI help
Full Mathematics section test
40 questions across the whole section · 40 min · one timed test
Number Systems
Real numbers are made up of rational numbers, which can be written as p/q with q not equal to 0, and irrational numbers, which cannot. A rational number has a decimal expansion that either terminates or repeats. An irrational number has a decimal expansion that never ends and never repeats. Every real number has exactly one point on the number line. This chapter also covers operations with surds, rationalising the denominator and the laws of exponents for real numbers.
Exam tip: When converting a repeating decimal, first count how many digits do not repeat and how many do. Then multiply by the matching powers of 10 before you subtract. For rationalising questions, always multiply by the conjugate and simplify the denominator first.
29 questionsPractice testPolynomials
A polynomial in one variable is an algebraic expression in which every power of the variable is a whole number. Its degree is the highest power of the variable. A zero of a polynomial p(x) is a number a for which p(a) = 0. The Remainder Theorem and the Factor Theorem link these zeroes to division and to factorisation. Algebraic identities give quick ways to expand, factorise and calculate.
Exam tip: Before factorising a cubic, add up its coefficients. If the sum is 0, then x = 1 is a zero. If (x + y + z) = 0 in a sum of cubes question, use x³ + y³ + z³ = 3xyz straight away instead of working out each cube.
28 questionsPractice testCoordinate Geometry
Coordinate geometry locates a point in a plane using two perpendicular number lines called the x-axis (horizontal) and the y-axis (vertical), which meet at the origin O(0, 0). Every point is written as an ordered pair (x, y): x is the abscissa, its perpendicular distance from the y-axis, and y is the ordinate, its perpendicular distance from the x-axis. The two axes divide the plane into four quadrants, and the signs of x and y tell you which quadrant a point is in. A point on an axis belongs to no quadrant.
Exam tip: Before naming a quadrant, write the sign pair of the point, for example (−, +), and match it against the list I (+,+), II (−,+), III (−,−), IV (+,−). For points on an axis, check which coordinate is zero.
26 questionsPractice testLinear Equations in Two Variables
A linear equation in two variables can be written in the form ax + by + c = 0, where a, b and c are real numbers and a and b are not both zero. A solution is an ordered pair (x, y) that makes the equation true when the values are substituted. Such an equation has infinitely many solutions: choose any value of one variable and solve for the other. To check whether a point is a solution, substitute its coordinates and see whether both sides are equal.
Exam tip: For any 'is it a solution' question, substitute and simplify the left side completely before comparing it with the right side. For questions that ask for the 'ax + by + c = 0 form', write all terms explicitly, including any 0·x or 0·y.
26 questionsPractice testIntroduction to Euclid's Geometry
This chapter introduces how Euclid, a teacher at Alexandria in Egypt, organised the geometry known in his time into a logical system in his book 'Elements', which has 13 books. He began with definitions, then took a few statements as true without proof (axioms and postulates), and proved everything else (propositions or theorems) from them. The chapter covers his definitions of point, line and surface, his common notions (axioms), his five postulates (with special attention to the fifth postulate), and the difference between an axiom and a theorem.
Exam tip: Learn the seven axioms and five postulates in NCERT's order and wording, because questions often ask which one justifies a step. For fifth-postulate numericals, add the two interior angles: if the sum is below 180°, the lines meet on that side; if it is exactly 180°, they are parallel.
30 questionsPractice testLines and Angles
This chapter builds the basic vocabulary of geometry: line segment, ray, collinear points, and acute, right, obtuse, straight and reflex angles. It studies the pairs of angles formed when lines intersect (linear pair, vertically opposite angles) and the angle relations formed when a transversal cuts parallel lines. It also shows that lines parallel to the same line are parallel to each other.
Exam tip: In transversal problems, first name the angle pair (corresponding, alternate or co-interior), then write the equation (equal, or sum 180°).
22 questionsPractice testTriangles
Two figures are congruent when they have exactly the same shape and size; two triangles are congruent when their corresponding sides and corresponding angles are equal. The rationalised NCERT chapter covers the congruence rules SAS (taken as an axiom), ASA, AAS, SSS and RHS, written with the correct matching of vertices. It then applies these rules to isosceles triangles: angles opposite equal sides are equal, and sides opposite equal angles are equal. Once two triangles are shown congruent, any remaining equal parts follow by CPCT.
Exam tip: In proofs, list the three pairs of equal parts with a reason for each and name the rule before writing CPCT. Write the congruence statement with the vertices in matching order.
30 questionsPractice testQuadrilaterals
This chapter studies the parallelogram, a quadrilateral whose opposite sides are parallel. A diagonal divides it into two congruent triangles. From this it follows that opposite sides are equal, opposite angles are equal and the diagonals bisect each other, and each of these properties, if true for a quadrilateral, also makes it a parallelogram. The chapter ends with the mid-point theorem and its converse, which are used for problems on triangles, trapeziums and the figure formed by joining mid-points.
Exam tip: For angle problems, use opposite angles equal and adjacent angles summing to 180°. For mid-point problems, first find which two mid-points are joined, then halve the third side.
28 questionsPractice testCircles
This chapter studies chords of a circle and the angles they make at the centre and at points on the circle. Equal chords subtend equal angles at the centre and are equidistant from it, and the perpendicular from the centre to a chord bisects that chord. The angle an arc subtends at the centre is double the angle it subtends at any point on the remaining part of the circle. In a cyclic quadrilateral, each pair of opposite angles adds up to 180 degrees.
Exam tip: Always draw the perpendicular from the centre to the chord and join the centre to one end of the chord. This gives a right triangle for every length question. For angle questions, first mark which arc subtends the angle.
29 questionsPractice testHeron's Formula
Heron's formula gives the area of a triangle from its three side lengths alone, so no height is needed. First find the semi-perimeter s = (a + b + c)/2, then use Area = √[s(s − a)(s − b)(s − c)]. The formula works for every kind of triangle: scalene, isosceles, equilateral or right-angled. To find the area of a quadrilateral, split it into two triangles with a diagonal and add their areas.
Exam tip: Write s, s − a, s − b and s − c on separate lines, then factorise the product into prime factors before taking the square root. This keeps the arithmetic clean and avoids mistakes with large numbers.
30 questionsPractice testSurface Areas and Volumes
This chapter covers the surface area and volume of three solids: the right circular cone, the sphere and the hemisphere. For a cone you need the radius r, height h and slant height l, where l = √(r² + h²). A sphere has one curved surface. A hemisphere is half a sphere and has a curved surface and a flat circular base. Most questions use π = 22/7 and ask you to find an area, a volume, a capacity or a cost, or to work backwards to a radius or height.
Exam tip: First write down r, h and l and calculate any missing value before choosing a formula. Cancel the 7 in 22/7 early so the arithmetic stays simple.
25 questionsPractice testStatistics
In the rationalised Class 9 syllabus, this chapter is about showing data as graphs and reading those graphs. A bar graph uses bars of equal width with equal gaps between them. A histogram uses touching rectangles for continuous class intervals, and each rectangle's area is proportional to the frequency of its class. A frequency polygon joins the points (class mark, frequency) with straight lines. Each end is closed at zero frequency at the class mark of an imagined class before the first class and after the last.
Exam tip: Before drawing a histogram, check whether all class widths are equal. If they are not, calculate adjusted heights using the minimum width before drawing anything.
28 questionsPractice testThe Mathematics of Maybe: Introduction to Probability
Probability measures how likely an event is, on a scale from 0 (impossible) to 1 (certain), with 1/2 meaning an even chance. It can be found experimentally, as the number of times an event happened divided by the total number of trials, or theoretically, as favourable outcomes divided by total outcomes when all outcomes are equally likely. The sample space is the set of all possible outcomes, and an event is any subset of it. Tree diagrams help list every outcome of multi-step experiments such as tossing two coins or tossing a coin and rolling a die.
Exam tip: Write out the sample space or draw a tree diagram before counting, and check that your answer lies between 0 and 1. For 'at least' or 'not' questions, using the complement is often quicker.
27 questionsPractice testPredicting What Comes Next: Exploring Sequences and Progressions
A sequence is an ordered list of numbers that follows a pattern, and it can be described by an explicit rule (the nth term in terms of n) or a recursive rule (each term from the one before it). In an arithmetic progression (AP) we add the same common difference d each time, so the nth term is a + (n - 1)d. In a geometric progression (GP) we multiply by the same common ratio r each time, so the nth term is ar^(n-1). The sum of the first n natural numbers is n(n + 1)/2, which Gauss found by pairing the first and last numbers.
Exam tip: First test whether the pattern adds a fixed number (AP) or multiplies by a fixed number (GP), then write the formula and substitute carefully. Check your nth-term rule by putting n = 1 and n = 2 to see that it gives the first two terms.
30 questionsPractice testPropositions and their Converses
A proposition is a statement that is either true or false, and many mathematical propositions have the form 'If P, then Q'. Its converse is 'If Q, then P', obtained by swapping the hypothesis and the conclusion. A proposition and its converse are independent: both may be true, only one may be true, or both may be false. One counterexample is enough to disprove a general statement, while examples alone can never prove it.
Exam tip: To write a converse, underline the 'if' part and the 'then' part and simply swap them. To test a converse, search for one counterexample; if you cannot find one, look for a proof.
30 questionsPractice testHow Quantities Combine: Understanding Data
This chapter shows how to combine quantities from different groups correctly. The overall mean of combined groups is a weighted average of the group means, with the group sizes as weights, so the simple mean of group means is usually wrong. The same idea of weighted averages works for mixtures (prices, concentrations) and for weighted marks. The chapter also covers reading stacked column charts and better alternatives to pie charts for comparing combined data.
Exam tip: For any combined average, first convert everything to totals (count x mean, volume x concentration, quantity x price), add the totals, then divide by the total count. Check that your answer lies between the group values and nearer the bigger group.
30 questionsPractice testThe World of Algorithms
An algorithm is a clear, finite, step-by-step procedure built from basic steps, repetition (loops) and conditional steps. The chapter uses digit-by-digit addition with carries and the greatest common divisor (gcd) to show how algorithms are designed, stored using data structures like lists, improved and analysed for the number of steps they take. It compares a first gcd method (listing divisors), Euclid's subtraction algorithm and Aryabhata's division-based method (kuttaka), and explains how to justify that an algorithm gives the correct answer and always stops.
Exam tip: Write gcd steps as a neat table of pairs (or a = q x b + r lines) so each step can be checked. For 'why it works' questions, use the key idea that common divisors do not change when you subtract or take remainders.
29 questionsPractice test
Mathematics: solved examples
A taste of each chapter's practice set — try it, then open the answer and solution.
- Number Systems
Which of the following is an irrational number between 2 and 2.5?
- A√7
- B9/4
- C√5
- D√3
Show answer & solution
Correct answer: (C) √5
4 < 5 < 6.25, so 2 < √5 < 2.5, and √5 is irrational. √3 is less than 2, √7 is about 2.65, and 9/4 is rational.
- Polynomials
(x + 1) is a factor of which of the following polynomials?
- Ax² + 3x + 5
- Bx³ − x² + x + 1
- Cx⁴ + x³ + x² + x + 1
- Dx³ + x² + x + 1
Show answer & solution
Correct answer: (D) x³ + x² + x + 1
For x³ + x² + x + 1, p(−1) = −1 + 1 − 1 + 1 = 0, so by the Factor Theorem (x + 1) is a factor. The other options give 1, 3 and −2 at x = −1.
- Coordinate Geometry
A point lies on the y-axis, 4 units below the origin. What are its coordinates?
- A(0, 4)
- B(−4, 0)
- C(4, 0)
- D(0, −4)
Show answer & solution
Correct answer: (D) (0, −4)
A point on the y-axis has abscissa 0, and 'below the origin' means a negative ordinate, so the point is (0, −4).