Class 12 (CBSE) · Physics
Electrostatic Potential and Capacitance
25 practice questions with full step-by-step solutions — free, no sign-up.
Reviewed by Kaustav Basak (19 years teaching)Written with AI helpReport a mistake
This chapter has
Electrostatic Potential and Capacitance — solved practice questions
6 Class 12 Physics questions with step-by-step solutions. Attempt each, then reveal the answer.
These worked examples are not in the timed test, so you can study them first.
- Q1easyReport
The electric potential at a point 0.3 m from a point charge of 5 nC is (k = 9 × 10⁹ SI):
- A1500 V
- B500 V
- C150 V
- D45 V
Show answer & solution
Correct answer: (C) 150 V
V = kq/r = 9×10⁹ × 5×10⁻⁹ / 0.3 = 45/0.3 = 150 V. - Q2easyReport
How much work is done in moving a charge q between two points on the same equipotential surface of potential V?
- AIt depends on the path followed
- BZero
- CMaximum, because the charge stays at potential V
- DqV
Show answer & solution
Correct answer: (B) Zero
W = q(V_B - V_A), and V_B = V_A on an equipotential surface, so W = 0 for any path. - Q3easyReport
How much work is done in moving a charge of 2 μC between two points whose potential difference is 50 V?
- A1 mJ
- B100 μJ
- C25 μJ
- D4 μJ
Show answer & solution
Correct answer: (B) 100 μJ
W = qΔV = 2×10⁻⁶ × 50 = 10⁻⁴ J = 100 μJ. - Q4mediumReport
Three charges of 1 μC each are placed at the vertices of an equilateral triangle of side 10 cm. The electrostatic potential energy of the system is:
- A0.27 J
- B0.09 J
- C0.18 J
- D0.81 J
Show answer & solution
Correct answer: (A) 0.27 J
There are 3 pairs, each at distance a: U = 3kq²/a = 3 × 9×10⁹ × 10⁻¹² / 0.1 = 3 × 0.09 = 0.27 J. - Q5easyReport
Which statement about equipotential surfaces is correct?
- ATwo different equipotential surfaces can intersect
- BThe electric field is tangent to an equipotential surface
- CAround a point charge, equipotential surfaces are equally spaced for equal steps of potential
- DNo work is done in moving a test charge along an equipotential surface
Show answer & solution
Correct answer: (D) No work is done in moving a test charge along an equipotential surface
Along an equipotential ΔV = 0, so W = qΔV = 0. The field is perpendicular to the surface, surfaces never intersect, and around a point charge they get farther apart as r increases. - Q6mediumReport
A charged parallel-plate capacitor stores energy U and is disconnected from the battery. A dielectric slab of constant K is then inserted to fill the gap completely. The stored energy becomes:
- AK2 U
- BKU
- CU/K
- DU
Show answer & solution
Correct answer: (C) U/K
With the battery disconnected, Q stays constant and C becomes KC. So U' = Q2/(2KC) = U/K. The missing energy is the work done by the field in pulling the slab in.
Ready to test yourself? Take the 19-question Electrostatic Potential and Capacitance test →