Class 11 (CBSE) · Physics

Mechanical Properties of Solids

20 practice questions with full step-by-step solutions — free, no sign-up.

Reviewed by (19 years teaching)Written with AI helpReport a mistake

This chapter has

8
easy
12
medium

Mechanical Properties of Solids — solved practice questions

5 Class 11 Physics questions with step-by-step solutions. Attempt each, then reveal the answer.

These worked examples are not in the timed test, so you can study them first.

  1. Q1easyReport

    A wire of cross-sectional area 2 mm² is pulled by a force of 100 N along its length. What is the tensile stress in the wire?

    • A5 × 105 N/m²
    • B2 × 107 N/m²
    • C5 × 107 N/m²
    • D5 × 108 N/m²
    Show answer & solution

    Correct answer: (C) 5 × 107 N/m²

    Stress = F/A = 100 / (2 × 10−6) = 5 × 107 N/m².
  2. Q2easyReport

    A wire 2 m long stretches by 1 mm when a load is hung from it. What is the longitudinal strain?

    • A2 × 10−3
    • B0.5
    • C5 × 10−4
    • D5 × 10−3
    Show answer & solution

    Correct answer: (C) 5 × 10−4

    Strain = ΔL/L = (1 × 10−3 m)/(2 m) = 5 × 10−4. Strain has no unit.
  3. Q3easyReport

    In the stress–strain curve of a metal wire, up to which point does Hooke's law (stress directly proportional to strain) hold?

    • AUltimate tensile strength
    • BYield point
    • CFracture point
    • DProportional limit
    Show answer & solution

    Correct answer: (D) Proportional limit

    The curve is a straight line, which is where Hooke's law holds, only up to the proportional limit. Between that point and the yield point the material is still elastic, but stress is no longer proportional to strain.
  4. Q4easyReport

    What is the Young's modulus of a perfectly rigid body?

    • AInfinite
    • BZero
    • CIt depends on the load applied
    • DUnity
    Show answer & solution

    Correct answer: (A) Infinite

    A perfectly rigid body shows no strain under any stress. Y = stress/strain, and the strain is zero, so Y is infinite.
  5. Q5mediumReport

    The bulk modulus of water is 2.2 × 109 N/m². By what percentage does a volume of water shrink when the pressure on it increases by 2.2 × 106 N/m²?

    • A0.01%
    • B10%
    • C1%
    • D0.1%
    Show answer & solution

    Correct answer: (D) 0.1%

    ΔV/V = Δp/B = (2.2 × 106)/(2.2 × 109) = 10−3, which is 0.1%.

Ready to test yourself? Take the 15-question Mechanical Properties of Solids test →